主要由电动机，减速器，传动轴，装在大型伞齿轮上的转盘，刮刀等件组成。 The disc duster is mainly composed of a motor, a reducer, a transmission shaft, a turntable mounted on a large bevel gear, a scraper and other parts.
The motor drives the drive shaft to rotate through the speed reducer. The transmission shaft drives the large gear to rotate through the small gear. The large gear is equipped with a gray disc. The disc will rotate (the forward and reverse rotation of the disc machine alternates according to the needs of the process) and the vertical scraper on its upper part. The scraper is fixed to the cone bucket by the scraper support. After the finished lime falling from the upper part of the cone bucket falls on the rotating disc, it is scattered around by the action of a fixed scraper and falls into the ash discharge cylinder. Machine and discharge the finished lime outside the furnace.
, 料面不偏斜，并且在出灰过程中不破损块状石灰。 The characteristics of the disc ashing machine: the ash column in the furnace is evenly lowered when the ash is discharged , the material surface is not deflected, and the lumpy lime is not damaged during the ash discharging process. Can be fully automated with high quality and accuracy. A bigger feature is that the drive shaft and bearings can be replaced without disassembling the disk surface.